Choose your device type and follow the instructions….
iOS (iPhone and iPad)
1. From ‘Settings’ connect to the Wi-Fi signal ‘UoS Wi-Fi Setup’
2. Open Safari and navigate to stir.ac.uk/18w
3. A dialog box should open, warning that the website is trying to open settings, tap ‘Allow’
4. A dialog box will open, warning ‘profile downloaded – review profile in settings app if you want to install it’: click ‘Close’
5. Go to settings click on ‘General’ and then ‘Profiles’
6. Select ‘UoS eduroam PEAP’ click ‘Install’
7. On the ‘Warning’ screen click ‘Install’, click ‘Install’ on the pop up
8. Enter your University username noting the format below:
Staff should type their username in the format: username@stir.ac.uk
Students should type their username in the format: username@students.stir.ac.uk
9. Tap ‘Next’
10. Enter your University password, tap ‘Next’
11. Tap ‘Done’
12. Go to ‘Settings’ > ‘Wi-Fi’ and disconnect from ‘Wi-Fi setup’, your device will autoconnect you to eduroam in the future
Android
1. Go to ‘Settings’ on your phone
2. Tap ‘Wi-Fi’
3. Tap ‘eduroam‘
4. Fill in the following sections
EAP method = PEAP
Phase 2 authentication = MSCHAPV2
CA Certificate = Leave blank or select ‘Don’t validate‘
Identity =
> Staff should type their username in the format: username@stir.ac.uk
> Students should type their username in the format: username@students.stir.ac.uk
Anonymous Identity = leave blank
Password = your network password
6. Tap ‘connect‘
7. You should now be connected to eduroam
MacOS
1. Connect to the Wi-Fi access point called ‘UoS Wi-Fi Setup’
2. Open Safari and navigate to stir.ac.uk/18w, your browser should automatically download and run the setup file (1.mobileconfig)
3. On the ‘Do you want to allow downloads from “is.stir.ac.uk”?’ Click ‘Allow’
4. On the install ‘UoS eduroam PEAP?’ screen click ‘Continue’
5. On the ‘Are you sure you want to install profile “UoS eduroam PEAP”?’ screen click ‘Continue’
6. Enter your username and password in the format below:
Staff should type their username in the format: username@stir.ac.uk
Students should type their username in the format: username@students.stir.ac.uk
7. Click on ‘Install’
8. On the ‘Profiles/MDM wants to make changes screen’, enter your Mac Log on username and password and click ‘OK’
9. Disconnect from ‘Wi-Fi setup’, your device should autoconnect you to eduroam
Windows
1. Connect to the Wi-Fi access point called eduroam
2. Enter your University username and password, noting the format below:
Staff should type their username in the format username@stir.ac.uk
Students should type their username in the format username@students.stir.ac.uk
3. Click OK
4. On the Continue connecting? security screen click Continue
You should now be connected to eduroam